|
Page 1 of 1
|
[ 8 posts ] |
|
Jeep tie rod flip who's done it and what did you use
Author |
Message |
CJ7
PJI
Joined: Thu Sep 02, 2010 9:36 pm Posts: 638 Location: Shrewsbury, MA
|
Jeep tie rod flip who's done it and what did you use
Jeep tie rod flip Who's done it and what did you use?
reamer inserts
_________________ PatriotJeepers 86 CJ7 258, T18, Scout Dana 300 twin stick,Dana 44's, lockers 4wd Disc,35" BFG KM2's,8274 Warn winch, full cage ,OBA
|
Wed Mar 06, 2013 10:05 pm |
|
|
Mr Rock
JT4x4
Joined: Sun Oct 18, 2009 7:43 am Posts: 84 Location: Southeast CT
|
Re: Jeep tie rod flip who's done it and what did you use
I used Goforit inserts. Drilled out the knuckles and the draglink to tierod location and tacked the inserts in.
_________________ JT4x4 President 89 YJ
|
Fri Mar 15, 2013 3:48 pm |
|
|
CJ7
PJI
Joined: Thu Sep 02, 2010 9:36 pm Posts: 638 Location: Shrewsbury, MA
|
Re: Jeep tie rod flip who's done it and what did you use
thanks Rock, I just ordered a set for my CJ7 3 inserts $45 total.
Goferit offroad,Inc
_________________ PatriotJeepers 86 CJ7 258, T18, Scout Dana 300 twin stick,Dana 44's, lockers 4wd Disc,35" BFG KM2's,8274 Warn winch, full cage ,OBA
|
Sun Mar 17, 2013 7:39 pm |
|
|
jadkar
Joined: Mon Dec 31, 2012 4:25 pm Posts: 44 Location: North West NJ
|
Re: Jeep tie rod flip who's done it and what did you use
I have but done it on my JK, probably not the response you are looking for but for what its worth....
- Drilled out the knuckle - Insert conical grommet - Remove JK OEM draglink - Install your choice of after market draglinks (There's a OEM one from another Jeep that works well on the JK.. I forgot which model)
One thing to make sure on the JK is you raise the track bar mount along with the flip. You want to ensure the track bar and draglink are as parallel as possible or else you have nasty bump steer.
|
Tue Mar 19, 2013 3:10 pm |
|
|
CJ7
PJI
Joined: Thu Sep 02, 2010 9:36 pm Posts: 638 Location: Shrewsbury, MA
|
Re: Jeep tie rod flip who's done it and what did you use
I drilled a 3/4" hole and dropped in the insert.
_________________ PatriotJeepers 86 CJ7 258, T18, Scout Dana 300 twin stick,Dana 44's, lockers 4wd Disc,35" BFG KM2's,8274 Warn winch, full cage ,OBA
|
Tue Apr 02, 2013 8:40 pm |
|
|
Mr Rock
JT4x4
Joined: Sun Oct 18, 2009 7:43 am Posts: 84 Location: Southeast CT
|
Re: Jeep tie rod flip who's done it and what did you use
_________________ JT4x4 President 89 YJ
|
Thu Apr 04, 2013 5:21 pm |
|
|
CJ7
PJI
Joined: Thu Sep 02, 2010 9:36 pm Posts: 638 Location: Shrewsbury, MA
|
Re: Jeep tie rod flip who's done it and what did you use
Yes I ran 3 short welds on top.And I went back to a stock pitman arm. My old 4" drop pitman arm used to rub the tie rod. Now there is plenty of room and it's up out of the way.
_________________ PatriotJeepers 86 CJ7 258, T18, Scout Dana 300 twin stick,Dana 44's, lockers 4wd Disc,35" BFG KM2's,8274 Warn winch, full cage ,OBA
|
Fri Apr 05, 2013 9:56 am |
|
|
CJ7
PJI
Joined: Thu Sep 02, 2010 9:36 pm Posts: 638 Location: Shrewsbury, MA
|
Re: Jeep tie rod flip who's done it and what did you use
seams to work great.I went back to a stock pitman arm. no more rubbing and drag link nice and high out of the way.
_________________ PatriotJeepers 86 CJ7 258, T18, Scout Dana 300 twin stick,Dana 44's, lockers 4wd Disc,35" BFG KM2's,8274 Warn winch, full cage ,OBA
|
Sun Apr 07, 2013 10:31 am |
|
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 3 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|