nova4x4.org https://www.nova4x4.org/phpBB/ |
|
Jeep tie rod flip who's done it and what did you use https://www.nova4x4.org/phpBB/viewtopic.php?f=19&t=585 |
Page 1 of 1 |
Author: | CJ7 [ Wed Mar 06, 2013 10:05 pm ] |
Post subject: | Jeep tie rod flip who's done it and what did you use |
Jeep tie rod flip Who's done it and what did you use? reamer inserts |
Author: | Mr Rock [ Fri Mar 15, 2013 3:48 pm ] |
Post subject: | Re: Jeep tie rod flip who's done it and what did you use |
I used Goforit inserts. Drilled out the knuckles and the draglink to tierod location and tacked the inserts in. |
Author: | CJ7 [ Sun Mar 17, 2013 7:39 pm ] |
Post subject: | Re: Jeep tie rod flip who's done it and what did you use |
thanks Rock, I just ordered a set for my CJ7 3 inserts $45 total. Goferit offroad,Inc |
Author: | jadkar [ Tue Mar 19, 2013 3:10 pm ] |
Post subject: | Re: Jeep tie rod flip who's done it and what did you use |
I have but done it on my JK, probably not the response you are looking for but for what its worth.... - Drilled out the knuckle - Insert conical grommet - Remove JK OEM draglink - Install your choice of after market draglinks (There's a OEM one from another Jeep that works well on the JK.. I forgot which model) One thing to make sure on the JK is you raise the track bar mount along with the flip. You want to ensure the track bar and draglink are as parallel as possible or else you have nasty bump steer. |
Author: | CJ7 [ Tue Apr 02, 2013 8:40 pm ] | ||
Post subject: | Re: Jeep tie rod flip who's done it and what did you use | ||
I drilled a 3/4" hole and dropped in the insert.
|
Author: | Mr Rock [ Thu Apr 04, 2013 5:21 pm ] | |||||||||
Post subject: | Re: Jeep tie rod flip who's done it and what did you use | |||||||||
Did you tack weld it in? |
Author: | CJ7 [ Fri Apr 05, 2013 9:56 am ] | ||
Post subject: | Re: Jeep tie rod flip who's done it and what did you use | ||
Yes I ran 3 short welds on top.And I went back to a stock pitman arm. My old 4" drop pitman arm used to rub the tie rod. Now there is plenty of room and it's up out of the way.
|
Author: | CJ7 [ Sun Apr 07, 2013 10:31 am ] | ||
Post subject: | Re: Jeep tie rod flip who's done it and what did you use | ||
seams to work great.I went back to a stock pitman arm. no more rubbing and drag link nice and high out of the way.
|
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |